BEL-ART PRODUCTS

WRITE-ON LABEL TAPE

Available in 6 vivid colors. Great for use in low temperature applications.
Adheres to any clean surface, including Teflon® fluoropolymer resin coated materials, and peels off without leaving a sticky residue.

  • Pencil, ball-point pen or solvent ink marker remain legible under the most demanding laboratory conditions
  • Consists of colored paper with rubber resin adhesive that resists moisture and most solvents
  • Will withstand a maximum temperature of 157℃ (315℉) for 30 minutes or 80℃ (176℉) for 24 hours; can be used down to -80℃ (-112℉)
  • Withstands a steam autoclaving cycle at 121℃ (250℉) and gamma irradiation between 13.0 and 45.0kGy



SPINBAR MAGNETIC STIRRING BARS

  • Alnico magnet encapsulated in FDA Grade, USP Class VI Teflon® PTFE low friction coating; durable and inert
  • Manufactured in a registered ISO 9001:2009 facility, as verified by SGS certification
  • Autoclave safe



MULTI-ROLL TAPE DISPENSER

  • Alnico magnet encapsulated in FDA Grade, USP Class VI Teflon® PTFE low friction coating; durable and inert
  • Manufactured in a registered ISO 9001:2009 facility, as verified by SGS certification
  • Autoclave safe



BELPEN MARKERS

Quick Drying Waterproof Ink

  • Felt tip marking pens are perfect for labeling all types of glassware and plastics.
  • Permanent, quick drying ink remains waterproof and smudge proof
  • Will withstand autoclaving when dry
  • Pen with handy pocket clip is 13.3cm (5 1/4") long



CRYOGENIC STORAGE LABELS

Labels that Stand Up to Extreme Cold, Even Liquid Nitrogen

The strong, permanent adhesive on these labels withstands cold storage temperatures and maintains adhesion to glass, plastic, cardboard and more, even in liquid nitrogen.

  • Organize and label samples for short or long-term cold storage
  • Ideal for environments down to -196℃
  • Dot and rectangle shaped labels sized for 0.5 to 2.0mL cryogenic tubes
  • 67 x 25mm (2.6 x 1.0") rectangle for larger tube, cryo box and rack labeling
  • Available in sheets or rolls; sheets can be fed through a standard ink jet or laser printer utilizing the appropriate template (visit www.belart.com/labeltemp)
  • Overall thickness of the coated label is 7 mil
  • Use with non-water soluble printer inks and markers/pens or with Wet Surface Pen F13382-0000
  • For easy removal of labels, use Label-Off™ Label Remover F17077-0000
  • Autoclavable at 121℃ (250℉)